SIGMAGUARD 730

SIGMA VIKOTE 15

High-build, aluminum pigmented chlorinated rubber  primer/sealer   PRINCIPAL CHARACTERISTICS

• Anticorrosive primer/sealer
• Excellent water resistance
• Unsaponifiable
• Resistant to well designed/controlled cathodic protection
• Fast-drying
• Can be applied at low temperatures, down to –10°C (14°F)
• Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
• Compatible with antifoulings

• Alu light – Gray
• Eggshell

SIGMATHERM 175

Heat-resistant modified alkyd aluminum finish   PRINCIPAL CHARACTERISTICS

• Heat-resistant up to 175°C (350°F)
• High-brilliancy
• Spray application improves the appearance
• A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat

• Aluminum
• Gloss

SIGMAGUARD 750

Two-component, moisture-curing zinc-rich (ethyl) silicate  coating  

PRINCIPAL CHARACTERISTICS

• Tank coating with excellent solvent and chemical resistance
• To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
• Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
• High zinc content resulting in excellent corrosion protection
• Good impact and abrasion resistance
• Certificate for ASTM A-490 class 'B' for slip coefficient
• Recognized corrosion control coating (Lloyd's register)
• Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
• Complies with SSPC-Paint 20 level 2 and ISO 12944.5

SIGMACOVER 430

Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating   PRINCIPAL CHARACTERISTICS

• General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
• Good durability
• Good flow and wetting properties
• Easy application by airless spray
• Good cure at temperatures down to -5⁰C

• Light and dark gray
• Eggshell