SIGMAGUARD 730

SIGMA VIKOTE 15

High-build, aluminum pigmented chlorinated rubber  primer/sealer   PRINCIPAL CHARACTERISTICS

• Anticorrosive primer/sealer
• Excellent water resistance
• Unsaponifiable
• Resistant to well designed/controlled cathodic protection
• Fast-drying
• Can be applied at low temperatures, down to –10°C (14°F)
• Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
• Compatible with antifoulings

• Alu light – Gray
• Eggshell

SIGMASHIELD 460

Two-component, high solids glass flake reinforced polyamine adduct epoxy   coating   PRINCIPAL CHARACTERISTICS

• Excellent abrasion and impact resistance
• Suitable for use on ice-going vessels
• Excellent resistance to corrosion
• Long-term protection at areas subject to heavy wear and tear
• Resistant to splash and spillage of a wide range of chemicals
• Very low water permeability, due to glass flake barrier

• Black (other (light) colors on request)
• Gloss

SIGMAPRIME 200

Universal epoxy anticorrosive primer, based upon pure epoxy  technology  

PRINCIPAL CHARACTERISTICS

• Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo  holds
• Excellent anticorrosive properties and water resistance
• Surface tolerant primer
• Good chemical resistance
• Good abrasion resistance for dedicated areas of application
• Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals
• Excellent recoatability
• Suitable for application and curing in a wide range of climatic conditions
• Suitable for bulk supply and twin feed application
• Suitable on wet blast cleaned substrates (damp or dry)

COLOR AND GLOSS LEVEL

• Alu light, alu yellow, gray, yellow/green, redbrown
• Eggshell

SIGMACOVER 435

Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy    coating   PRINCIPAL CHARACTERISTICS

• General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
• Easy application, both by airless spray and brush
• Cures even at temperatures down to -10°C (14°F)
• A high relative humidity (maximum 95%) during application and curing does not influence the quality of the  coating
• Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy  coatings
• Can be recoated with various two-component and conventional coatings, even after long weathering  periods
• Resistant to water and splash of mild chemicals
• Excellent durability
• Tough, with long-term flexibility
• Resistant to temperatures up to 200°C (390°F) (see SYSTEM SHEET 4062)

• Light gray (9553-05), dark gray ( 9558-05), green (9441-05), aluminum (9590-05)
• Eggshell