SIGMA VIKOTE 15

Category Uncategorized, Uncategorized

High-build, aluminum pigmented chlorinated rubber primer/sealer

PRINCIPAL CHARACTERISTICS

Anticorrosive primer/sealer
Excellent water resistance
Unsaponifiable
Resistant to well designed/controlled cathodic protection
Fast-drying
Can be applied at low temperatures, down to –10°C (14°F)
Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
Compatible with antifoulings

COLOR AND GLOSS LEVEL

Alu light – Gray
Eggshell

Please access this link for detailed information SIGMA VIKOTE 15 EN

Danh mục: Uncategorized, Uncategorized

Dung môi pha:

21-06
21-06

Sản phẩm tương tự

Related products

SIGMA VIKOTE 56
21-06
Modified acrylic finish PRINCIPAL CHARACTERISTICS
- Finish coat for above-water areas
- Good gloss- and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMA VIKOTE 56 EN
SIGMAZINC 158
90-53
Two-component, moisture-curing zinc (ethyl) silicate primer
PRINCIPAL CHARACTERISTICS
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Complies with the compositional requirements of SSPC-Paint 20, Level 2
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Galvanic action eliminates sub-film corrosion
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 158 EN
SIGMAZINC 100
90-53
Two component polyamide cured zinc epoxy primer
PRINCIPAL CHARACTERISTICS
- Designed as a system primer for various paint systems
- Good corrosion prevention properties
- Quick drying, can be overcoated after a short interval even if at low temperature
- Good low temperature drying the subsequent coat must be unsaponifiable
COLOR AND GLOSS LEVEL
- Gray
- Flat
Please access this link for detailed information
SIGMAZINC 100 EN
SIGMAZINC 9
90-53
Two-component, moisture-curing zinc (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Specified for structural joints according to ASTM A325 or A490 Bolts RCSC specification, Class B
- Complies with the compositional requirements of SSPC-Paint 20, Level 1
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 9 EN
SIGMASHIELD 220
91-92
Two-component, reinforced high solids polyamine adduct cured epoxy primer PRINCIPAL CHARACTERISTICS
- General-purpose primer for coating systems for steel
- Good abrasion resistance
- Outstanding sea water resistance
- Excellent corrosion resistance
- Good resistance against chemically-polluted water
- Resistant to well designed/controlled cathodic protection
COLOR AND GLOSS LEVEL
- Yellow/green
- Gloss
Please access this link for detailed information
SIGMASHIELD 220 EN
SIGMARINE 48
20-05
General purpose gloss paint based on an alkyd-modified resin PRINCIPAL CHARACTERISTICS
- Particularly suitable as a finish for boottop, topside, deck and deck equipment
- A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention
- Can be applied over most intact alkyd paints
- This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions
- Also available with non-skid material (supplied separately) for use on deck surfaces
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMARINE 48 EN
SIGMAPRIME 200
91-92
Universal epoxy anticorrosive primer, based upon pure epoxy technology
PRINCIPAL CHARACTERISTICS
- Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo holds
- Excellent anticorrosive properties and water resistance
- Surface tolerant primer
- Good chemical resistance
- Good abrasion resistance for dedicated areas of application
- Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals
- Excellent recoatability
- Suitable for application and curing in a wide range of climatic conditions
- Suitable for bulk supply and twin feed application
- Suitable on wet blast cleaned substrates (damp or dry)
COLOR AND GLOSS LEVEL
- Alu light, alu yellow, gray, yellow/green, redbrown
- Eggshell
Please access this link for detailed information
SIGMAPRIME 200 EN
SIGMAGUARD 730
91-92
Two-component, high solids polyamine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Tank coating with good chemical resistance against a wide range of chemicals
- Short curing periods
- Good low-temperature curing
- Easy to clean
- Can be used under insulation up to 150°C (300°F)
COLOR AND GLOSS LEVEL
- Offwhite, cream
- Gloss
Please access this link for detailed information
SIGMAGUARD 730 EN
SIGMACOVER 525
91-92
Two-component, polyamine-cured epoxy tie coat PRINCIPAL CHARACTERISTICS
- Final coat in epoxy underwater anticorrosive systems
- Epoxy tie coat for use with PPG antifoulings as specified
- Excellent water resistance
- Good abrasion- and impact resistance
COLOR AND GLOSS LEVEL
- Black, gray
- Flat
Please access this link for detailed information
SIGMACOVER 525 EN
SIGMACOVER 430
91-92
Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating PRINCIPAL CHARACTERISTICS
- General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
- Good durability
- Good flow and wetting properties
- Easy application by airless spray
- Good cure at temperatures down to -5⁰C
COLOR AND GLOSS LEVEL
- Light and dark gray
- Eggshell
Please access this link for detailed information
SIGMACOVER 430 EN

SIGMA VIKOTE 15

Related products

SIGMA VIKOTE 56

SIGMAZINC 158

PRINCIPAL CHARACTERISTICS

SIGMAZINC 100

PRINCIPAL CHARACTERISTICS

SIGMAZINC 9

PRINCIPAL CHARACTERISTICS

SIGMASHIELD 220

SIGMARINE 48

SIGMAPRIME 200

PRINCIPAL CHARACTERISTICS

COLOR AND GLOSS LEVEL

SIGMAGUARD 730

SIGMACOVER 525

SIGMACOVER 430