SIGMAGUARD 750

PHENGUARD 935

  Two-component, high-build, amine adduct-cured novolac phenolic epoxy    coating     PRINCIPAL CHARACTERISTICS

• Second coat in the PHENGUARD tank coating system
• Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
• Maximum cargo flexibility
• Low cargo absorption
• Good resistance to hot water
• Recognized corrosion control coating (Lloyd's register)
• Good application properties, resulting in a smooth surface

• Pink
• Eggshell

SIGMAWELD 165

Two-component, moisture-curing, zinc (ethyl) silicate prefabrication  primer  

PRINCIPAL CHARACTERISTICS

• Suitable for automatic application on shot blasted steel plates
• Fast drying properties
• Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic or manual welding)
• Provides corrosion protection up to 9 months, when applied at a DFT of 13 µm (0.5 mil) (depending on exposure conditions and blasting profile)
• Can be used as a first coat in various paint systems
• Suitable for sea water immersion in combination with controlled cathodic protection  systems
• Excellent thermal stability minimizes heat damage during hot work procedures
• No adherence of weldspatter at surrounding primed surface
• Approved by Lloyd's Register of Shipping for use as a prefabrication primer

• Gray, reddish gray
• Flat

SIGMARINE 24

Modified zinc phosphate alkyd  primer   PRINCIPAL CHARACTERISTICS

• Economical, general-purpose maintenance and new-building primer
• Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
• The adhesion of subsequent coats is not affected by long weathering periods of the primer
• Should not be used over zinc primers, except when exposed to dry interior  conditions
• To be recoated with conventional paint systems
• A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat   technique

• Yellow, brown, red, gray, dark gray (offwhite only on request)
• Flat

SIGMACOVER 525

Two-component, polyamine-cured epoxy tie coat   PRINCIPAL CHARACTERISTICS

• Final coat in epoxy underwater anticorrosive systems
• Epoxy tie coat for use with PPG antifoulings as specified
• Excellent water resistance
• Good abrasion- and impact resistance

• Black, gray
• Flat