SIGMADUR 188

SIGMAZINC 158

Two-component, moisture-curing zinc (ethyl) silicate  primer  

PRINCIPAL CHARACTERISTICS

• Certificate for ASTM A-490 class 'B' for slip coefficient
• Complies with the compositional requirements of SSPC-Paint 20, Level 2
• Anticorrosive primer for structural steel
• Suitable as a system primer in various paint systems based on unsaponifiable binders
• Galvanic action eliminates sub-film corrosion
• Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
• When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C  (1000°F)
• Good low-temperature curing
• Good impact and abrasion resistance
• Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids

• Gray, greenish gray
• Flat

SIGMATHERM 500

Heat resistant modified alkyd aluminium  coating   PRINCIPAL CHARACTERISTICS

• To be used for the internal and external protection of steel surfaces
• Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
• A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
• Application by spray improves the appearance

• Aluminum
• Eggshell

SIGMAPRIME 200

Universal epoxy anticorrosive primer, based upon pure epoxy  technology  

PRINCIPAL CHARACTERISTICS

• Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo  holds
• Excellent anticorrosive properties and water resistance
• Surface tolerant primer
• Good chemical resistance
• Good abrasion resistance for dedicated areas of application
• Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals
• Excellent recoatability
• Suitable for application and curing in a wide range of climatic conditions
• Suitable for bulk supply and twin feed application
• Suitable on wet blast cleaned substrates (damp or dry)

COLOR AND GLOSS LEVEL

• Alu light, alu yellow, gray, yellow/green, redbrown
• Eggshell

SIGMACOVER 435

Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy    coating   PRINCIPAL CHARACTERISTICS

• General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
• Easy application, both by airless spray and brush
• Cures even at temperatures down to -10°C (14°F)
• A high relative humidity (maximum 95%) during application and curing does not influence the quality of the  coating
• Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy  coatings
• Can be recoated with various two-component and conventional coatings, even after long weathering  periods
• Resistant to water and splash of mild chemicals
• Excellent durability
• Tough, with long-term flexibility
• Resistant to temperatures up to 200°C (390°F) (see SYSTEM SHEET 4062)

• Light gray (9553-05), dark gray ( 9558-05), green (9441-05), aluminum (9590-05)
• Eggshell