SIGMACOVER 430

Category Uncategorized, Uncategorized

Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating

PRINCIPAL CHARACTERISTICS

General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
Good durability
Good flow and wetting properties
Easy application by airless spray
Good cure at temperatures down to -5⁰C

COLOR AND GLOSS LEVEL

Light and dark gray
Eggshell

Please access this link for detailed information SIGMACOVER 430 EN

Danh mục: Uncategorized, Uncategorized

Dung môi pha:

91-92
91-92

Sản phẩm tương tự

Related products

SIGMA VIKOTE 56
21-06
Modified acrylic finish PRINCIPAL CHARACTERISTICS
- Finish coat for above-water areas
- Good gloss- and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMA VIKOTE 56 EN
SIGMA VIKOTE 15
21-06
High-build, aluminum pigmented chlorinated rubber primer/sealer PRINCIPAL CHARACTERISTICS
- Anticorrosive primer/sealer
- Excellent water resistance
- Unsaponifiable
- Resistant to well designed/controlled cathodic protection
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
- Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
- Compatible with antifoulings
COLOR AND GLOSS LEVEL
- Alu light – Gray
- Eggshell
Please access this link for detailed information
SIGMA VIKOTE 15 EN
PHENGUARD 940
Two-component, high-build, amine adduct-cured novolac phenolic epoxy finish PRINCIPAL CHARACTERISTICS
- Finish coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
- Easy to clean
COLOR AND GLOSS LEVEL
- Light gray
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 940 EN
SIGMAZINC 109
91-92
Two-component, high solids polyamide adduct cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS
- Designed as a system primer for various paint systems
- Excellent anticorrosive properties
- Quick-drying, can be overcoated after a short interval
- Can serve as a holding primer for various maintenance systems for a total repair
- Very good primer for systems with high solids epoxy buildcoats
- Complies with SSPC-Paint 20 level 2 and ISO 5
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMAZINC 109 EN
SIGMAZINC 100
90-53
Two component polyamide cured zinc epoxy primer
PRINCIPAL CHARACTERISTICS
- Designed as a system primer for various paint systems
- Good corrosion prevention properties
- Quick drying, can be overcoated after a short interval even if at low temperature
- Good low temperature drying the subsequent coat must be unsaponifiable
COLOR AND GLOSS LEVEL
- Gray
- Flat
Please access this link for detailed information
SIGMAZINC 100 EN
SIGMASHIELD 220
91-92
Two-component, reinforced high solids polyamine adduct cured epoxy primer PRINCIPAL CHARACTERISTICS
- General-purpose primer for coating systems for steel
- Good abrasion resistance
- Outstanding sea water resistance
- Excellent corrosion resistance
- Good resistance against chemically-polluted water
- Resistant to well designed/controlled cathodic protection
COLOR AND GLOSS LEVEL
- Yellow/green
- Gloss
Please access this link for detailed information
SIGMASHIELD 220 EN
SIGMARINE 24
20-05
Modified zinc phosphate alkyd primer PRINCIPAL CHARACTERISTICS
- Economical, general-purpose maintenance and new-building primer
- Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
- The adhesion of subsequent coats is not affected by long weathering periods of the primer
- Should not be used over zinc primers, except when exposed to dry interior conditions
- To be recoated with conventional paint systems
- A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat technique
COLOR AND GLOSS LEVEL
- Yellow, brown, red, gray, dark gray (offwhite only on request)
- Flat
Please access this link for detailed information
SIGMARINE 24 EN
SIGMAGUARD 730
91-92
Two-component, high solids polyamine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Tank coating with good chemical resistance against a wide range of chemicals
- Short curing periods
- Good low-temperature curing
- Easy to clean
- Can be used under insulation up to 150°C (300°F)
COLOR AND GLOSS LEVEL
- Offwhite, cream
- Gloss
Please access this link for detailed information
SIGMAGUARD 730 EN
SIGMADUR 188
21-06
Two-component, aliphatic acrylic polyurethane finish PRINCIPAL CHARACTERISTICS
- Unlimited recoatable
- Excellent resistance to atmospheric exposure conditions
- Excellent color and gloss retention
- Non-chalking, non-yellowing
- Cures at temperatures down to -5°C (23°F)
- Tough and abrasion resistant
- Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals
- Can be recoated even after long atmospheric exposure
- Good application properties
COLOR AND GLOSS LEVEL
- White and black, colors available request
- Gloss
Please access this link for detailed information
SIGMADUR 188 EN
SIGMACOVER 435
91-92
Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating PRINCIPAL CHARACTERISTICS
- General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
- Easy application, both by airless spray and brush
- Cures even at temperatures down to -10°C (14°F)
- A high relative humidity (maximum 95%) during application and curing does not influence the quality of the coating
- Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings
- Can be recoated with various two-component and conventional coatings, even after long weathering periods
- Resistant to water and splash of mild chemicals
- Excellent durability
- Tough, with long-term flexibility
- Resistant to temperatures up to 200°C (390°F) (see SYSTEM SHEET 4062)
COLOR AND GLOSS LEVEL
- Light gray (9553-05), dark gray ( 9558-05), green (9441-05), aluminum (9590-05)
- Eggshell
Please access this link for detailed information
SIGMACOVER 435 EN

SIGMACOVER 430

Related products

SIGMA VIKOTE 56

SIGMA VIKOTE 15

PHENGUARD 940

SIGMAZINC 109

SIGMAZINC 100

PRINCIPAL CHARACTERISTICS

SIGMASHIELD 220

SIGMARINE 24

SIGMAGUARD 730

SIGMADUR 188

SIGMACOVER 435