SIGMAZINC 109

Category Uncategorized

Two-component, high solids polyamide adduct cured zinc rich epoxy primer

PRINCIPAL CHARACTERISTICS

Designed as a system primer for various paint systems
Excellent anticorrosive properties
Quick-drying, can be overcoated after a short interval
Can serve as a holding primer for various maintenance systems for a total repair
Very good primer for systems with high solids epoxy buildcoats
Complies with SSPC-Paint 20 level 2 and ISO 5

COLOR AND GLOSS LEVEL

Gray, reddish gray
Flat

Please access this link for detailed information SIGMAZINC 109 EN

Danh mục: Uncategorized

Dung môi pha:

91-92

Sản phẩm tương tự

Related products

SIGMA VIKOTE 18
21-06
High-build, aluminum pigmented chlorinated rubber primer/sealer PRINCIPAL CHARACTERISTICS
- Anticorrosive primer/sealer
- Excellent water resistance
- Unsaponifiable
- Resistant to well designed/controlled cathodic protection
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
- Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
- Compatible with antifoulings
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMA VIKOTE 18 EN
PHENGUARD 930
91-92
Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS
- Primer coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
COLOR AND GLOSS LEVEL
- Offwhite
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 930 EN
SIGMAZINC 9
90-53
Two-component, moisture-curing zinc (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Specified for structural joints according to ASTM A325 or A490 Bolts RCSC specification, Class B
- Complies with the compositional requirements of SSPC-Paint 20, Level 1
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 9 EN
SIGMAWELD 165
90-53
Two-component, moisture-curing, zinc (ethyl) silicate prefabrication primer
PRINCIPAL CHARACTERISTICS
- Suitable for automatic application on shot blasted steel plates
- Fast drying properties
- Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic or manual welding)
- Provides corrosion protection up to 9 months, when applied at a DFT of 13 µm (0.5 mil) (depending on exposure conditions and blasting profile)
- Can be used as a first coat in various paint systems
- Suitable for sea water immersion in combination with controlled cathodic protection systems
- Excellent thermal stability minimizes heat damage during hot work procedures
- No adherence of weldspatter at surrounding primed surface
- Approved by Lloyd's Register of Shipping for use as a prefabrication primer
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMAWELD 165 EN
SIGMATHERM 540
21-06
One-component, heat-resistant, moisture-curing silicone aluminum PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 540°C (1000°F) on steel, grit-blasted to SSPC SP10/NACE 2 (ISO-Sa2½)
- Heat-resistant up to 400°C (750°F) on rusted steel, power tool cleaned to ISO-St3
- To be used for the internal and external protection of steel surfaces
- No heat cure necessary between coats
- Excellent resistance against weathering
- Also suitable on top of zinc silicate primer
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Complies with NACE SP0198 for austenitic stainless steels and carbon steels under thermal insulation
COLOR AND GLOSS LEVEL
- Aluminum and black
- Eggshell
Please access this link for detailed information
SIGMATHERM 540 EN
SIGMASHIELD 420
91-92
Two-component, reinforced high solids polyamine adduct cured epoxy coating PRINCIPAL CHARACTERISTICS
- Coating for cargo tanks of bulk- or oil carriers and storage tanks
- Buildcoat for underwater- and boottop systems
- Excellent abrasion and impact resistance
- Outstanding (sea)water resistance
- Easy to clean
COLOR AND GLOSS LEVEL
- Gray, redbrown (other colors available on request)
- Gloss
Please access this link for detailed information
SIGMASHIELD 420 EN
SIGMARINE 28
21-06
One-component, quick-drying, high-build multipurpose zinc phosphate primer

PRINCIPAL CHARACTERISTICS
- Onboard maintenance primer for above-water areas
- Easy application
- Quick-drying
- Recoatable with various one and two component products
- Surface tolerant
- Good anticorrosive properties
COLOR AND GLOSS LEVEL
- Gray, redbrown, offwhite
- Flat
Please access this link for detailed information SIGMARINE 28 EN
SIGMADUR 188
21-06
Two-component, aliphatic acrylic polyurethane finish PRINCIPAL CHARACTERISTICS
- Unlimited recoatable
- Excellent resistance to atmospheric exposure conditions
- Excellent color and gloss retention
- Non-chalking, non-yellowing
- Cures at temperatures down to -5°C (23°F)
- Tough and abrasion resistant
- Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals
- Can be recoated even after long atmospheric exposure
- Good application properties
COLOR AND GLOSS LEVEL
- White and black, colors available request
- Gloss
Please access this link for detailed information
SIGMADUR 188 EN
SIGMACOVER 620
91-92
Two-component, surface-tolerant, high-build, polyamide-cured epoxy primer/coating PRINCIPAL CHARACTERISTICS
- Excellent corrosion resistance
- Good flexibility
- Surface tolerant coating for lower grade of steel preparation
- Good drying and curing property
- Easy application by different application methods such as airless spray, brush
- Low temperature version available if required
COLOR AND GLOSS LEVEL
- Gray, off-white (other colors available on request)
- Aluminum colors (dark gray, light gray)
- Eggshell
Please access this link for detailed information
SIGMACOVER 620 EN
SIGMACOVER 525
91-92
Two-component, polyamine-cured epoxy tie coat PRINCIPAL CHARACTERISTICS
- Final coat in epoxy underwater anticorrosive systems
- Epoxy tie coat for use with PPG antifoulings as specified
- Excellent water resistance
- Good abrasion- and impact resistance
COLOR AND GLOSS LEVEL
- Black, gray
- Flat
Please access this link for detailed information
SIGMACOVER 525 EN

SIGMAZINC 109

Related products

SIGMA VIKOTE 18

PHENGUARD 930

SIGMAZINC 9

PRINCIPAL CHARACTERISTICS

SIGMAWELD 165

PRINCIPAL CHARACTERISTICS

SIGMATHERM 540

SIGMASHIELD 420

SIGMARINE 28

SIGMADUR 188

SIGMACOVER 620

SIGMACOVER 525