SIGMA VIKOTE 56

SIGMAZINC 100

Two component polyamide cured zinc epoxy primer  

PRINCIPAL CHARACTERISTICS

• Designed as a system primer for various paint systems
• Good corrosion prevention properties
• Quick drying, can be overcoated after a short interval even if at low temperature
• Good low temperature drying the subsequent coat must be unsaponifiable

• Gray
• Flat

SIGMASHIELD 460

Two-component, high solids glass flake reinforced polyamine adduct epoxy   coating   PRINCIPAL CHARACTERISTICS

• Excellent abrasion and impact resistance
• Suitable for use on ice-going vessels
• Excellent resistance to corrosion
• Long-term protection at areas subject to heavy wear and tear
• Resistant to splash and spillage of a wide range of chemicals
• Very low water permeability, due to glass flake barrier

• Black (other (light) colors on request)
• Gloss

SIGMARINE 24

Modified zinc phosphate alkyd  primer   PRINCIPAL CHARACTERISTICS

• Economical, general-purpose maintenance and new-building primer
• Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
• The adhesion of subsequent coats is not affected by long weathering periods of the primer
• Should not be used over zinc primers, except when exposed to dry interior  conditions
• To be recoated with conventional paint systems
• A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat   technique

• Yellow, brown, red, gray, dark gray (offwhite only on request)
• Flat