SIGMAZINC 100

Category Uncategorized

Two component polyamide cured zinc epoxy primer

PRINCIPAL CHARACTERISTICS

Designed as a system primer for various paint systems
Good corrosion prevention properties
Quick drying, can be overcoated after a short interval even if at low temperature
Good low temperature drying the subsequent coat must be unsaponifiable

COLOR AND GLOSS LEVEL

Gray
Flat

Please access this link for detailed information SIGMAZINC 100 EN

Danh mục: Uncategorized

Dung môi pha:

90-53

Sản phẩm tương tự

Related products

SIGMA VIKOTE 18
21-06
High-build, aluminum pigmented chlorinated rubber primer/sealer PRINCIPAL CHARACTERISTICS
- Anticorrosive primer/sealer
- Excellent water resistance
- Unsaponifiable
- Resistant to well designed/controlled cathodic protection
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
- Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
- Compatible with antifoulings
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMA VIKOTE 18 EN
PHENGUARD 935
91-92
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Second coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
COLOR AND GLOSS LEVEL
- Pink
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 935 EN
SIGMATHERM 540
21-06
One-component, heat-resistant, moisture-curing silicone aluminum PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 540°C (1000°F) on steel, grit-blasted to SSPC SP10/NACE 2 (ISO-Sa2½)
- Heat-resistant up to 400°C (750°F) on rusted steel, power tool cleaned to ISO-St3
- To be used for the internal and external protection of steel surfaces
- No heat cure necessary between coats
- Excellent resistance against weathering
- Also suitable on top of zinc silicate primer
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Complies with NACE SP0198 for austenitic stainless steels and carbon steels under thermal insulation
COLOR AND GLOSS LEVEL
- Aluminum and black
- Eggshell
Please access this link for detailed information
SIGMATHERM 540 EN
SIGMATHERM 350
21-06
Heat-resistant silicone/acrylic finish PRINCIPAL CHARACTERISTICS
- Excellent resistance against weathering
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Heat-resistant up to 350°C (660°F)
- To be used for the internal and external protection of steel surfaces
- Widely compatible with inorganic zinc primers
COLOR AND GLOSS LEVEL
- White, aluminum (other colors available on request)
- Semi-gloss
Please access this link for detailed information
SIGMATHERM 350 EN
SIGMATHERM 175
20-05
Heat-resistant modified alkyd aluminum finish PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 175°C (350°F)
- High-brilliancy
- Spray application improves the appearance
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
COLOR AND GLOSS LEVEL
- Aluminum
- Gloss
Please access this link for detailed information
SIGMATHERM 175 EN
SIGMASHIELD 220
91-92
Two-component, reinforced high solids polyamine adduct cured epoxy primer PRINCIPAL CHARACTERISTICS
- General-purpose primer for coating systems for steel
- Good abrasion resistance
- Outstanding sea water resistance
- Excellent corrosion resistance
- Good resistance against chemically-polluted water
- Resistant to well designed/controlled cathodic protection
COLOR AND GLOSS LEVEL
- Yellow/green
- Gloss
Please access this link for detailed information
SIGMASHIELD 220 EN
SIGMARINE 48
20-05
General purpose gloss paint based on an alkyd-modified resin PRINCIPAL CHARACTERISTICS
- Particularly suitable as a finish for boottop, topside, deck and deck equipment
- A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention
- Can be applied over most intact alkyd paints
- This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions
- Also available with non-skid material (supplied separately) for use on deck surfaces
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMARINE 48 EN
SIGMARINE 28
21-06
One-component, quick-drying, high-build multipurpose zinc phosphate primer

PRINCIPAL CHARACTERISTICS
- Onboard maintenance primer for above-water areas
- Easy application
- Quick-drying
- Recoatable with various one and two component products
- Surface tolerant
- Good anticorrosive properties
COLOR AND GLOSS LEVEL
- Gray, redbrown, offwhite
- Flat
Please access this link for detailed information SIGMARINE 28 EN
SIGMARINE 24
20-05
Modified zinc phosphate alkyd primer PRINCIPAL CHARACTERISTICS
- Economical, general-purpose maintenance and new-building primer
- Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
- The adhesion of subsequent coats is not affected by long weathering periods of the primer
- Should not be used over zinc primers, except when exposed to dry interior conditions
- To be recoated with conventional paint systems
- A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat technique
COLOR AND GLOSS LEVEL
- Yellow, brown, red, gray, dark gray (offwhite only on request)
- Flat
Please access this link for detailed information
SIGMARINE 24 EN
SIGMACOVER 525
91-92
Two-component, polyamine-cured epoxy tie coat PRINCIPAL CHARACTERISTICS
- Final coat in epoxy underwater anticorrosive systems
- Epoxy tie coat for use with PPG antifoulings as specified
- Excellent water resistance
- Good abrasion- and impact resistance
COLOR AND GLOSS LEVEL
- Black, gray
- Flat
Please access this link for detailed information
SIGMACOVER 525 EN

SIGMAZINC 100

PRINCIPAL CHARACTERISTICS

Related products

SIGMA VIKOTE 18

PHENGUARD 935

SIGMATHERM 540

SIGMATHERM 350

SIGMATHERM 175

SIGMASHIELD 220

SIGMARINE 48

SIGMARINE 28

SIGMARINE 24

SIGMACOVER 525