SIGMATHERM 350

SIGMAZINC 158

Two-component, moisture-curing zinc (ethyl) silicate  primer  

PRINCIPAL CHARACTERISTICS

• Certificate for ASTM A-490 class 'B' for slip coefficient
• Complies with the compositional requirements of SSPC-Paint 20, Level 2
• Anticorrosive primer for structural steel
• Suitable as a system primer in various paint systems based on unsaponifiable binders
• Galvanic action eliminates sub-film corrosion
• Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
• When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C  (1000°F)
• Good low-temperature curing
• Good impact and abrasion resistance
• Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids

• Gray, greenish gray
• Flat

SIGMATHERM 500

Heat resistant modified alkyd aluminium  coating   PRINCIPAL CHARACTERISTICS

• To be used for the internal and external protection of steel surfaces
• Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
• A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
• Application by spray improves the appearance

• Aluminum
• Eggshell

SIGMAGUARD 730

Two-component, high solids polyamine cured phenolic epoxy   coating   PRINCIPAL CHARACTERISTICS

• Tank coating with good chemical resistance against a wide range of chemicals
• Short curing periods
• Good low-temperature curing
• Easy to clean
• Can be used under insulation up to 150°C (300°F)

• Offwhite, cream
• Gloss