PHENGUARD 930

SIGMARINE 48

General purpose gloss paint based on an alkyd-modified  resin PRINCIPAL CHARACTERISTICS

• Particularly suitable as a finish for boottop, topside, deck and deck  equipment
• A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss  retention
• Can be applied over most intact alkyd paints
• This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric  conditions
• Also available with non-skid material (supplied separately) for use on deck surfaces

• White and various other colors (see also SIGMACARE shade card)
• Gloss

SIGMAGUARD 750

Two-component, moisture-curing zinc-rich (ethyl) silicate  coating 

PRINCIPAL CHARACTERISTICS

• Tank coating with excellent solvent and chemical resistance
• To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
• Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
• High zinc content resulting in excellent corrosion protection
• Good impact and abrasion resistance
• Certificate for ASTM A-490 class 'B' for slip coefficient
• Recognized corrosion control coating (Lloyd's register)
• Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
• Complies with SSPC-Paint 20 level 2 and ISO 12944.5

SIGMACOVER 435

Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy    coating PRINCIPAL CHARACTERISTICS

• General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
• Easy application, both by airless spray and brush
• Cures even at temperatures down to -10°C (14°F)
• A high relative humidity (maximum 95%) during application and curing does not influence the quality of the  coating
• Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy  coatings
• Can be recoated with various two-component and conventional coatings, even after long weathering  periods
• Resistant to water and splash of mild chemicals
• Excellent durability
• Tough, with long-term flexibility
• Resistant to temperatures up to 200°C (390°F) (see SYSTEM SHEET 4062)

• Light gray (9553-05), dark gray ( 9558-05), green (9441-05), aluminum (9590-05)
• Eggshell