SIGMACOVER 525

Category Uncategorized, Uncategorized

Two-component, polyamine-cured epoxy tie coat

PRINCIPAL CHARACTERISTICS

Final coat in epoxy underwater anticorrosive systems
Epoxy tie coat for use with PPG antifoulings as specified
Excellent water resistance
Good abrasion- and impact resistance

COLOR AND GLOSS LEVEL

Black, gray
Flat

Please access this link for detailed information SIGMACOVER 525 EN

Danh mục: Uncategorized, Uncategorized

Dung môi pha:

91-92
91-92

Sản phẩm tương tự

Related products

SIGMA VIKOTE 56
21-06
Modified acrylic finish PRINCIPAL CHARACTERISTICS
- Finish coat for above-water areas
- Good gloss- and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMA VIKOTE 56 EN
SIGMA VIKOTE 18
21-06
High-build, aluminum pigmented chlorinated rubber primer/sealer PRINCIPAL CHARACTERISTICS
- Anticorrosive primer/sealer
- Excellent water resistance
- Unsaponifiable
- Resistant to well designed/controlled cathodic protection
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
- Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
- Compatible with antifoulings
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMA VIKOTE 18 EN
SIGMA VIKOTE 15
21-06
High-build, aluminum pigmented chlorinated rubber primer/sealer PRINCIPAL CHARACTERISTICS
- Anticorrosive primer/sealer
- Excellent water resistance
- Unsaponifiable
- Resistant to well designed/controlled cathodic protection
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
- Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
- Compatible with antifoulings
COLOR AND GLOSS LEVEL
- Alu light – Gray
- Eggshell
Please access this link for detailed information
SIGMA VIKOTE 15 EN
PHENGUARD 935
91-92
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Second coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
COLOR AND GLOSS LEVEL
- Pink
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 935 EN
SIGMATHERM 500
20-05
Heat resistant modified alkyd aluminium coating PRINCIPAL CHARACTERISTICS
- To be used for the internal and external protection of steel surfaces
- Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Application by spray improves the appearance
COLOR AND GLOSS LEVEL
- Aluminum
- Eggshell
Please access this link for detailed information
SIGMATHERM 500 EN
SIGMATHERM 350
21-06
Heat-resistant silicone/acrylic finish PRINCIPAL CHARACTERISTICS
- Excellent resistance against weathering
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Heat-resistant up to 350°C (660°F)
- To be used for the internal and external protection of steel surfaces
- Widely compatible with inorganic zinc primers
COLOR AND GLOSS LEVEL
- White, aluminum (other colors available on request)
- Semi-gloss
Please access this link for detailed information
SIGMATHERM 350 EN
SIGMATHERM 175
20-05
Heat-resistant modified alkyd aluminum finish PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 175°C (350°F)
- High-brilliancy
- Spray application improves the appearance
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
COLOR AND GLOSS LEVEL
- Aluminum
- Gloss
Please access this link for detailed information
SIGMATHERM 175 EN
SIGMASHIELD 460
90-53
Two-component, high solids glass flake reinforced polyamine adduct epoxy coating PRINCIPAL CHARACTERISTICS
- Excellent abrasion and impact resistance
- Suitable for use on ice-going vessels
- Excellent resistance to corrosion
- Long-term protection at areas subject to heavy wear and tear
- Resistant to splash and spillage of a wide range of chemicals
- Very low water permeability, due to glass flake barrier
COLOR AND GLOSS LEVEL
- Black (other (light) colors on request)
- Gloss
Please access this link for detailed information
SIGMASHIELD 460 EN
SIGMASHIELD 420
91-92
Two-component, reinforced high solids polyamine adduct cured epoxy coating PRINCIPAL CHARACTERISTICS
- Coating for cargo tanks of bulk- or oil carriers and storage tanks
- Buildcoat for underwater- and boottop systems
- Excellent abrasion and impact resistance
- Outstanding (sea)water resistance
- Easy to clean
COLOR AND GLOSS LEVEL
- Gray, redbrown (other colors available on request)
- Gloss
Please access this link for detailed information
SIGMASHIELD 420 EN
SIGMARINE 48
20-05
General purpose gloss paint based on an alkyd-modified resin PRINCIPAL CHARACTERISTICS
- Particularly suitable as a finish for boottop, topside, deck and deck equipment
- A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention
- Can be applied over most intact alkyd paints
- This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions
- Also available with non-skid material (supplied separately) for use on deck surfaces
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMARINE 48 EN

SIGMACOVER 525

Related products

SIGMA VIKOTE 56

SIGMA VIKOTE 18

SIGMA VIKOTE 15

PHENGUARD 935

SIGMATHERM 500

SIGMATHERM 350

SIGMATHERM 175

SIGMASHIELD 460

SIGMASHIELD 420

SIGMARINE 48