SIGMARINE 28

SIGMAWELD 165

Two-component, moisture-curing, zinc (ethyl) silicate prefabrication  primer  

PRINCIPAL CHARACTERISTICS

• Suitable for automatic application on shot blasted steel plates
• Fast drying properties
• Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic or manual welding)
• Provides corrosion protection up to 9 months, when applied at a DFT of 13 µm (0.5 mil) (depending on exposure conditions and blasting profile)
• Can be used as a first coat in various paint systems
• Suitable for sea water immersion in combination with controlled cathodic protection  systems
• Excellent thermal stability minimizes heat damage during hot work procedures
• No adherence of weldspatter at surrounding primed surface
• Approved by Lloyd's Register of Shipping for use as a prefabrication primer

• Gray, reddish gray
• Flat

SIGMARINE 48

General purpose gloss paint based on an alkyd-modified  resin   PRINCIPAL CHARACTERISTICS

• Particularly suitable as a finish for boottop, topside, deck and deck  equipment
• A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss  retention
• Can be applied over most intact alkyd paints
• This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric  conditions
• Also available with non-skid material (supplied separately) for use on deck surfaces

• White and various other colors (see also SIGMACARE shade card)
• Gloss

SIGMAGUARD 750

Two-component, moisture-curing zinc-rich (ethyl) silicate  coating  

PRINCIPAL CHARACTERISTICS

• Tank coating with excellent solvent and chemical resistance
• To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
• Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
• High zinc content resulting in excellent corrosion protection
• Good impact and abrasion resistance
• Certificate for ASTM A-490 class 'B' for slip coefficient
• Recognized corrosion control coating (Lloyd's register)
• Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
• Complies with SSPC-Paint 20 level 2 and ISO 12944.5