SIGMATHERM 175

SIGMAZINC 109

Two-component, high solids polyamide adduct cured zinc rich epoxy   primer   PRINCIPAL CHARACTERISTICS

• Designed as a system primer for various paint systems
• Excellent anticorrosive properties
• Quick-drying, can be overcoated after a short interval
• Can serve as a holding primer for various maintenance systems for a total repair
• Very good primer for systems with high solids epoxy buildcoats
• Complies with SSPC-Paint 20 level 2 and ISO 5

• Gray, reddish gray
• Flat

SIGMATHERM 350

Heat-resistant silicone/acrylic finish   PRINCIPAL CHARACTERISTICS

• Excellent resistance against weathering
• A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
• Heat-resistant up to 350°C (660°F)
• To be used for the internal and external protection of steel surfaces
• Widely compatible with inorganic zinc  primers

• White, aluminum (other colors available on request)
• Semi-gloss

SIGMAPRIME 200

Universal epoxy anticorrosive primer, based upon pure epoxy  technology  

PRINCIPAL CHARACTERISTICS

• Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo  holds
• Excellent anticorrosive properties and water resistance
• Surface tolerant primer
• Good chemical resistance
• Good abrasion resistance for dedicated areas of application
• Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals
• Excellent recoatability
• Suitable for application and curing in a wide range of climatic conditions
• Suitable for bulk supply and twin feed application
• Suitable on wet blast cleaned substrates (damp or dry)

COLOR AND GLOSS LEVEL

• Alu light, alu yellow, gray, yellow/green, redbrown
• Eggshell

SIGMACOVER 430

Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating   PRINCIPAL CHARACTERISTICS

• General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
• Good durability
• Good flow and wetting properties
• Easy application by airless spray
• Good cure at temperatures down to -5⁰C

• Light and dark gray
• Eggshell