SIGMATHERM 500

SIGMAZINC 158

Two-component, moisture-curing zinc (ethyl) silicate  primer  

PRINCIPAL CHARACTERISTICS

• Certificate for ASTM A-490 class 'B' for slip coefficient
• Complies with the compositional requirements of SSPC-Paint 20, Level 2
• Anticorrosive primer for structural steel
• Suitable as a system primer in various paint systems based on unsaponifiable binders
• Galvanic action eliminates sub-film corrosion
• Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
• When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C  (1000°F)
• Good low-temperature curing
• Good impact and abrasion resistance
• Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids

• Gray, greenish gray
• Flat

SIGMASHIELD 460

Two-component, high solids glass flake reinforced polyamine adduct epoxy   coating   PRINCIPAL CHARACTERISTICS

• Excellent abrasion and impact resistance
• Suitable for use on ice-going vessels
• Excellent resistance to corrosion
• Long-term protection at areas subject to heavy wear and tear
• Resistant to splash and spillage of a wide range of chemicals
• Very low water permeability, due to glass flake barrier

• Black (other (light) colors on request)
• Gloss

SIGMACOVER 525

Two-component, polyamine-cured epoxy tie coat   PRINCIPAL CHARACTERISTICS

• Final coat in epoxy underwater anticorrosive systems
• Epoxy tie coat for use with PPG antifoulings as specified
• Excellent water resistance
• Good abrasion- and impact resistance

• Black, gray
• Flat