SIGMAWELD 165

Sản phẩm tương tự

Related products

PHENGUARD 935
91-92
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Second coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
COLOR AND GLOSS LEVEL
- Pink
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 935 EN
PHENGUARD 930
91-92
Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS
- Primer coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
COLOR AND GLOSS LEVEL
- Offwhite
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 930 EN
SIGMAZINC 158
90-53
Two-component, moisture-curing zinc (ethyl) silicate primer
PRINCIPAL CHARACTERISTICS
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Complies with the compositional requirements of SSPC-Paint 20, Level 2
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Galvanic action eliminates sub-film corrosion
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 158 EN
SIGMAZINC 109
91-92
Two-component, high solids polyamide adduct cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS
- Designed as a system primer for various paint systems
- Excellent anticorrosive properties
- Quick-drying, can be overcoated after a short interval
- Can serve as a holding primer for various maintenance systems for a total repair
- Very good primer for systems with high solids epoxy buildcoats
- Complies with SSPC-Paint 20 level 2 and ISO 5
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMAZINC 109 EN
SIGMATHERM 500
20-05
Heat resistant modified alkyd aluminium coating PRINCIPAL CHARACTERISTICS
- To be used for the internal and external protection of steel surfaces
- Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Application by spray improves the appearance
COLOR AND GLOSS LEVEL
- Aluminum
- Eggshell
Please access this link for detailed information
SIGMATHERM 500 EN
SIGMATHERM 350
21-06
Heat-resistant silicone/acrylic finish PRINCIPAL CHARACTERISTICS
- Excellent resistance against weathering
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Heat-resistant up to 350°C (660°F)
- To be used for the internal and external protection of steel surfaces
- Widely compatible with inorganic zinc primers
COLOR AND GLOSS LEVEL
- White, aluminum (other colors available on request)
- Semi-gloss
Please access this link for detailed information
SIGMATHERM 350 EN
SIGMASHIELD 460
90-53
Two-component, high solids glass flake reinforced polyamine adduct epoxy coating PRINCIPAL CHARACTERISTICS
- Excellent abrasion and impact resistance
- Suitable for use on ice-going vessels
- Excellent resistance to corrosion
- Long-term protection at areas subject to heavy wear and tear
- Resistant to splash and spillage of a wide range of chemicals
- Very low water permeability, due to glass flake barrier
COLOR AND GLOSS LEVEL
- Black (other (light) colors on request)
- Gloss
Please access this link for detailed information
SIGMASHIELD 460 EN
SIGMARINE 24
20-05
Modified zinc phosphate alkyd primer PRINCIPAL CHARACTERISTICS
- Economical, general-purpose maintenance and new-building primer
- Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
- The adhesion of subsequent coats is not affected by long weathering periods of the primer
- Should not be used over zinc primers, except when exposed to dry interior conditions
- To be recoated with conventional paint systems
- A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat technique
COLOR AND GLOSS LEVEL
- Yellow, brown, red, gray, dark gray (offwhite only on request)
- Flat
Please access this link for detailed information
SIGMARINE 24 EN
SIGMAGUARD 750
90-53
Two-component, moisture-curing zinc-rich (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Tank coating with excellent solvent and chemical resistance
- To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- High zinc content resulting in excellent corrosion protection
- Good impact and abrasion resistance
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Recognized corrosion control coating (Lloyd's register)
- Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
- Complies with SSPC-Paint 20 level 2 and ISO 12944.5
Please access this link for detailed information
SIGMAGUARD 750 EN
SIGMACOVER 620
91-92
Two-component, surface-tolerant, high-build, polyamide-cured epoxy primer/coating PRINCIPAL CHARACTERISTICS
- Excellent corrosion resistance
- Good flexibility
- Surface tolerant coating for lower grade of steel preparation
- Good drying and curing property
- Easy application by different application methods such as airless spray, brush
- Low temperature version available if required
COLOR AND GLOSS LEVEL
- Gray, off-white (other colors available on request)
- Aluminum colors (dark gray, light gray)
- Eggshell
Please access this link for detailed information
SIGMACOVER 620 EN