SIGMAPRIME 200

Sản phẩm tương tự

Related products

SIGMA VIKOTE 15
21-06
High-build, aluminum pigmented chlorinated rubber primer/sealer PRINCIPAL CHARACTERISTICS
- Anticorrosive primer/sealer
- Excellent water resistance
- Unsaponifiable
- Resistant to well designed/controlled cathodic protection
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
- Tolerates a DFT up to 150 µm (6.0 mils) at overlaps without sagging
- Compatible with antifoulings
COLOR AND GLOSS LEVEL
- Alu light – Gray
- Eggshell
Please access this link for detailed information
SIGMA VIKOTE 15 EN
SIGMAZINC 9
90-53
Two-component, moisture-curing zinc (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Specified for structural joints according to ASTM A325 or A490 Bolts RCSC specification, Class B
- Complies with the compositional requirements of SSPC-Paint 20, Level 1
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 9 EN
SIGMAWELD 165
90-53
Two-component, moisture-curing, zinc (ethyl) silicate prefabrication primer
PRINCIPAL CHARACTERISTICS
- Suitable for automatic application on shot blasted steel plates
- Fast drying properties
- Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic or manual welding)
- Provides corrosion protection up to 9 months, when applied at a DFT of 13 µm (0.5 mil) (depending on exposure conditions and blasting profile)
- Can be used as a first coat in various paint systems
- Suitable for sea water immersion in combination with controlled cathodic protection systems
- Excellent thermal stability minimizes heat damage during hot work procedures
- No adherence of weldspatter at surrounding primed surface
- Approved by Lloyd's Register of Shipping for use as a prefabrication primer
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMAWELD 165 EN
SIGMATHERM 500
20-05
Heat resistant modified alkyd aluminium coating PRINCIPAL CHARACTERISTICS
- To be used for the internal and external protection of steel surfaces
- Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Application by spray improves the appearance
COLOR AND GLOSS LEVEL
- Aluminum
- Eggshell
Please access this link for detailed information
SIGMATHERM 500 EN
SIGMATHERM 175
20-05
Heat-resistant modified alkyd aluminum finish PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 175°C (350°F)
- High-brilliancy
- Spray application improves the appearance
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
COLOR AND GLOSS LEVEL
- Aluminum
- Gloss
Please access this link for detailed information
SIGMATHERM 175 EN
SIGMARINE 28
21-06
One-component, quick-drying, high-build multipurpose zinc phosphate primer

PRINCIPAL CHARACTERISTICS
- Onboard maintenance primer for above-water areas
- Easy application
- Quick-drying
- Recoatable with various one and two component products
- Surface tolerant
- Good anticorrosive properties
COLOR AND GLOSS LEVEL
- Gray, redbrown, offwhite
- Flat
Please access this link for detailed information SIGMARINE 28 EN
SIGMARINE 24
20-05
Modified zinc phosphate alkyd primer PRINCIPAL CHARACTERISTICS
- Economical, general-purpose maintenance and new-building primer
- Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
- The adhesion of subsequent coats is not affected by long weathering periods of the primer
- Should not be used over zinc primers, except when exposed to dry interior conditions
- To be recoated with conventional paint systems
- A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat technique
COLOR AND GLOSS LEVEL
- Yellow, brown, red, gray, dark gray (offwhite only on request)
- Flat
Please access this link for detailed information
SIGMARINE 24 EN
SIGMAGUARD 750
90-53
Two-component, moisture-curing zinc-rich (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Tank coating with excellent solvent and chemical resistance
- To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- High zinc content resulting in excellent corrosion protection
- Good impact and abrasion resistance
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Recognized corrosion control coating (Lloyd's register)
- Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
- Complies with SSPC-Paint 20 level 2 and ISO 12944.5
Please access this link for detailed information
SIGMAGUARD 750 EN
SIGMAGUARD 730
91-92
Two-component, high solids polyamine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Tank coating with good chemical resistance against a wide range of chemicals
- Short curing periods
- Good low-temperature curing
- Easy to clean
- Can be used under insulation up to 150°C (300°F)
COLOR AND GLOSS LEVEL
- Offwhite, cream
- Gloss
Please access this link for detailed information
SIGMAGUARD 730 EN
SIGMACOVER 620
91-92
Two-component, surface-tolerant, high-build, polyamide-cured epoxy primer/coating PRINCIPAL CHARACTERISTICS
- Excellent corrosion resistance
- Good flexibility
- Surface tolerant coating for lower grade of steel preparation
- Good drying and curing property
- Easy application by different application methods such as airless spray, brush
- Low temperature version available if required
COLOR AND GLOSS LEVEL
- Gray, off-white (other colors available on request)
- Aluminum colors (dark gray, light gray)
- Eggshell
Please access this link for detailed information
SIGMACOVER 620 EN