SIGMAPRIME 200

Sản phẩm tương tự

Related products

SIGMA VIKOTE 56
21-06
Modified acrylic finish PRINCIPAL CHARACTERISTICS
- Finish coat for above-water areas
- Good gloss- and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMA VIKOTE 56 EN
PHENGUARD 935
91-92
Two-component, high-build, amine adduct-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Second coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
COLOR AND GLOSS LEVEL
- Pink
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 935 EN
SIGMAZINC 9
90-53
Two-component, moisture-curing zinc (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Specified for structural joints according to ASTM A325 or A490 Bolts RCSC specification, Class B
- Complies with the compositional requirements of SSPC-Paint 20, Level 1
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 9 EN
SIGMATHERM 500
20-05
Heat resistant modified alkyd aluminium coating PRINCIPAL CHARACTERISTICS
- To be used for the internal and external protection of steel surfaces
- Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Application by spray improves the appearance
COLOR AND GLOSS LEVEL
- Aluminum
- Eggshell
Please access this link for detailed information
SIGMATHERM 500 EN
SIGMARINE 48
20-05
General purpose gloss paint based on an alkyd-modified resin PRINCIPAL CHARACTERISTICS
- Particularly suitable as a finish for boottop, topside, deck and deck equipment
- A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention
- Can be applied over most intact alkyd paints
- This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions
- Also available with non-skid material (supplied separately) for use on deck surfaces
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMARINE 48 EN
SIGMARINE 28
21-06
One-component, quick-drying, high-build multipurpose zinc phosphate primer

PRINCIPAL CHARACTERISTICS
- Onboard maintenance primer for above-water areas
- Easy application
- Quick-drying
- Recoatable with various one and two component products
- Surface tolerant
- Good anticorrosive properties
COLOR AND GLOSS LEVEL
- Gray, redbrown, offwhite
- Flat
Please access this link for detailed information SIGMARINE 28 EN
SIGMAGUARD 750
90-53
Two-component, moisture-curing zinc-rich (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Tank coating with excellent solvent and chemical resistance
- To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- High zinc content resulting in excellent corrosion protection
- Good impact and abrasion resistance
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Recognized corrosion control coating (Lloyd's register)
- Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
- Complies with SSPC-Paint 20 level 2 and ISO 12944.5
Please access this link for detailed information
SIGMAGUARD 750 EN
SIGMADUR 188
21-06
Two-component, aliphatic acrylic polyurethane finish PRINCIPAL CHARACTERISTICS
- Unlimited recoatable
- Excellent resistance to atmospheric exposure conditions
- Excellent color and gloss retention
- Non-chalking, non-yellowing
- Cures at temperatures down to -5°C (23°F)
- Tough and abrasion resistant
- Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals
- Can be recoated even after long atmospheric exposure
- Good application properties
COLOR AND GLOSS LEVEL
- White and black, colors available request
- Gloss
Please access this link for detailed information
SIGMADUR 188 EN
SIGMACOVER 435
91-92
Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating PRINCIPAL CHARACTERISTICS
- General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
- Easy application, both by airless spray and brush
- Cures even at temperatures down to -10°C (14°F)
- A high relative humidity (maximum 95%) during application and curing does not influence the quality of the coating
- Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings
- Can be recoated with various two-component and conventional coatings, even after long weathering periods
- Resistant to water and splash of mild chemicals
- Excellent durability
- Tough, with long-term flexibility
- Resistant to temperatures up to 200°C (390°F) (see SYSTEM SHEET 4062)
COLOR AND GLOSS LEVEL
- Light gray (9553-05), dark gray ( 9558-05), green (9441-05), aluminum (9590-05)
- Eggshell
Please access this link for detailed information
SIGMACOVER 435 EN
SIGMACOVER 430
91-92
Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating PRINCIPAL CHARACTERISTICS
- General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
- Good durability
- Good flow and wetting properties
- Easy application by airless spray
- Good cure at temperatures down to -5⁰C
COLOR AND GLOSS LEVEL
- Light and dark gray
- Eggshell
Please access this link for detailed information
SIGMACOVER 430 EN