SIGMATHERM 500

Category Uncategorized, Uncategorized

Heat resistant modified alkyd aluminium coating

PRINCIPAL CHARACTERISTICS

To be used for the internal and external protection of steel surfaces
Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
Application by spray improves the appearance

COLOR AND GLOSS LEVEL

Aluminum
Eggshell

Please access this link for detailed information SIGMATHERM 500 EN

Danh mục: Uncategorized, Uncategorized

Dung môi pha:

20-05
20-05

Sản phẩm tương tự

Related products

PHENGUARD 940
Two-component, high-build, amine adduct-cured novolac phenolic epoxy finish PRINCIPAL CHARACTERISTICS
- Finish coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
- Easy to clean
COLOR AND GLOSS LEVEL
- Light gray
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 940 EN
PHENGUARD 930
91-92
Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS
- Primer coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
COLOR AND GLOSS LEVEL
- Offwhite
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 930 EN
SIGMAZINC 158
90-53
Two-component, moisture-curing zinc (ethyl) silicate primer
PRINCIPAL CHARACTERISTICS
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Complies with the compositional requirements of SSPC-Paint 20, Level 2
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Galvanic action eliminates sub-film corrosion
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 158 EN
SIGMATHERM 540
21-06
One-component, heat-resistant, moisture-curing silicone aluminum PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 540°C (1000°F) on steel, grit-blasted to SSPC SP10/NACE 2 (ISO-Sa2½)
- Heat-resistant up to 400°C (750°F) on rusted steel, power tool cleaned to ISO-St3
- To be used for the internal and external protection of steel surfaces
- No heat cure necessary between coats
- Excellent resistance against weathering
- Also suitable on top of zinc silicate primer
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Complies with NACE SP0198 for austenitic stainless steels and carbon steels under thermal insulation
COLOR AND GLOSS LEVEL
- Aluminum and black
- Eggshell
Please access this link for detailed information
SIGMATHERM 540 EN
SIGMASHIELD 420
91-92
Two-component, reinforced high solids polyamine adduct cured epoxy coating PRINCIPAL CHARACTERISTICS
- Coating for cargo tanks of bulk- or oil carriers and storage tanks
- Buildcoat for underwater- and boottop systems
- Excellent abrasion and impact resistance
- Outstanding (sea)water resistance
- Easy to clean
COLOR AND GLOSS LEVEL
- Gray, redbrown (other colors available on request)
- Gloss
Please access this link for detailed information
SIGMASHIELD 420 EN
SIGMARINE 48
20-05
General purpose gloss paint based on an alkyd-modified resin PRINCIPAL CHARACTERISTICS
- Particularly suitable as a finish for boottop, topside, deck and deck equipment
- A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention
- Can be applied over most intact alkyd paints
- This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions
- Also available with non-skid material (supplied separately) for use on deck surfaces
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMARINE 48 EN
SIGMARINE 24
20-05
Modified zinc phosphate alkyd primer PRINCIPAL CHARACTERISTICS
- Economical, general-purpose maintenance and new-building primer
- Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
- The adhesion of subsequent coats is not affected by long weathering periods of the primer
- Should not be used over zinc primers, except when exposed to dry interior conditions
- To be recoated with conventional paint systems
- A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat technique
COLOR AND GLOSS LEVEL
- Yellow, brown, red, gray, dark gray (offwhite only on request)
- Flat
Please access this link for detailed information
SIGMARINE 24 EN
SIGMAGUARD 750
90-53
Two-component, moisture-curing zinc-rich (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Tank coating with excellent solvent and chemical resistance
- To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- High zinc content resulting in excellent corrosion protection
- Good impact and abrasion resistance
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Recognized corrosion control coating (Lloyd's register)
- Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
- Complies with SSPC-Paint 20 level 2 and ISO 12944.5
Please access this link for detailed information
SIGMAGUARD 750 EN
SIGMACOVER 525
91-92
Two-component, polyamine-cured epoxy tie coat PRINCIPAL CHARACTERISTICS
- Final coat in epoxy underwater anticorrosive systems
- Epoxy tie coat for use with PPG antifoulings as specified
- Excellent water resistance
- Good abrasion- and impact resistance
COLOR AND GLOSS LEVEL
- Black, gray
- Flat
Please access this link for detailed information
SIGMACOVER 525 EN
SIGMACOVER 435
91-92
Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating PRINCIPAL CHARACTERISTICS
- General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
- Easy application, both by airless spray and brush
- Cures even at temperatures down to -10°C (14°F)
- A high relative humidity (maximum 95%) during application and curing does not influence the quality of the coating
- Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings
- Can be recoated with various two-component and conventional coatings, even after long weathering periods
- Resistant to water and splash of mild chemicals
- Excellent durability
- Tough, with long-term flexibility
- Resistant to temperatures up to 200°C (390°F) (see SYSTEM SHEET 4062)
COLOR AND GLOSS LEVEL
- Light gray (9553-05), dark gray ( 9558-05), green (9441-05), aluminum (9590-05)
- Eggshell
Please access this link for detailed information
SIGMACOVER 435 EN

SIGMATHERM 500

Related products

PHENGUARD 940

PHENGUARD 930

SIGMAZINC 158

PRINCIPAL CHARACTERISTICS

SIGMATHERM 540

SIGMASHIELD 420

SIGMARINE 48

SIGMARINE 24

SIGMAGUARD 750

PRINCIPAL CHARACTERISTICS

SIGMACOVER 525

SIGMACOVER 435