SIGMARINE 24

Sản phẩm tương tự

Related products

SIGMA VIKOTE 56
21-06
Modified acrylic finish PRINCIPAL CHARACTERISTICS
- Finish coat for above-water areas
- Good gloss- and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMA VIKOTE 56 EN
SIGMAWELD 165
90-53
Two-component, moisture-curing, zinc (ethyl) silicate prefabrication primer
PRINCIPAL CHARACTERISTICS
- Suitable for automatic application on shot blasted steel plates
- Fast drying properties
- Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic or manual welding)
- Provides corrosion protection up to 9 months, when applied at a DFT of 13 µm (0.5 mil) (depending on exposure conditions and blasting profile)
- Can be used as a first coat in various paint systems
- Suitable for sea water immersion in combination with controlled cathodic protection systems
- Excellent thermal stability minimizes heat damage during hot work procedures
- No adherence of weldspatter at surrounding primed surface
- Approved by Lloyd's Register of Shipping for use as a prefabrication primer
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMAWELD 165 EN
SIGMATHERM 500
20-05
Heat resistant modified alkyd aluminium coating PRINCIPAL CHARACTERISTICS
- To be used for the internal and external protection of steel surfaces
- Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Application by spray improves the appearance
COLOR AND GLOSS LEVEL
- Aluminum
- Eggshell
Please access this link for detailed information
SIGMATHERM 500 EN
SIGMATHERM 175
20-05
Heat-resistant modified alkyd aluminum finish PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 175°C (350°F)
- High-brilliancy
- Spray application improves the appearance
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
COLOR AND GLOSS LEVEL
- Aluminum
- Gloss
Please access this link for detailed information
SIGMATHERM 175 EN
SIGMARINE 28
21-06
One-component, quick-drying, high-build multipurpose zinc phosphate primer

PRINCIPAL CHARACTERISTICS
- Onboard maintenance primer for above-water areas
- Easy application
- Quick-drying
- Recoatable with various one and two component products
- Surface tolerant
- Good anticorrosive properties
COLOR AND GLOSS LEVEL
- Gray, redbrown, offwhite
- Flat
Please access this link for detailed information SIGMARINE 28 EN
SIGMAPRIME 200
91-92
Universal epoxy anticorrosive primer, based upon pure epoxy technology
PRINCIPAL CHARACTERISTICS
- Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo holds
- Excellent anticorrosive properties and water resistance
- Surface tolerant primer
- Good chemical resistance
- Good abrasion resistance for dedicated areas of application
- Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals
- Excellent recoatability
- Suitable for application and curing in a wide range of climatic conditions
- Suitable for bulk supply and twin feed application
- Suitable on wet blast cleaned substrates (damp or dry)
COLOR AND GLOSS LEVEL
- Alu light, alu yellow, gray, yellow/green, redbrown
- Eggshell
Please access this link for detailed information
SIGMAPRIME 200 EN
SIGMAGUARD 750
90-53
Two-component, moisture-curing zinc-rich (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Tank coating with excellent solvent and chemical resistance
- To be used as tank coating or as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- High zinc content resulting in excellent corrosion protection
- Good impact and abrasion resistance
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Recognized corrosion control coating (Lloyd's register)
- Must not be used for immersion in alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
- Complies with SSPC-Paint 20 level 2 and ISO 12944.5
Please access this link for detailed information
SIGMAGUARD 750 EN
SIGMAGUARD 730
91-92
Two-component, high solids polyamine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS
- Tank coating with good chemical resistance against a wide range of chemicals
- Short curing periods
- Good low-temperature curing
- Easy to clean
- Can be used under insulation up to 150°C (300°F)
COLOR AND GLOSS LEVEL
- Offwhite, cream
- Gloss
Please access this link for detailed information
SIGMAGUARD 730 EN
SIGMACOVER 620
91-92
Two-component, surface-tolerant, high-build, polyamide-cured epoxy primer/coating PRINCIPAL CHARACTERISTICS
- Excellent corrosion resistance
- Good flexibility
- Surface tolerant coating for lower grade of steel preparation
- Good drying and curing property
- Easy application by different application methods such as airless spray, brush
- Low temperature version available if required
COLOR AND GLOSS LEVEL
- Gray, off-white (other colors available on request)
- Aluminum colors (dark gray, light gray)
- Eggshell
Please access this link for detailed information
SIGMACOVER 620 EN
SIGMACOVER 435
91-92
Two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating PRINCIPAL CHARACTERISTICS
- General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions
- Easy application, both by airless spray and brush
- Cures even at temperatures down to -10°C (14°F)
- A high relative humidity (maximum 95%) during application and curing does not influence the quality of the coating
- Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings
- Can be recoated with various two-component and conventional coatings, even after long weathering periods
- Resistant to water and splash of mild chemicals
- Excellent durability
- Tough, with long-term flexibility
- Resistant to temperatures up to 200°C (390°F) (see SYSTEM SHEET 4062)
COLOR AND GLOSS LEVEL
- Light gray (9553-05), dark gray ( 9558-05), green (9441-05), aluminum (9590-05)
- Eggshell
Please access this link for detailed information
SIGMACOVER 435 EN