SIGMASHIELD 420

SIGMAZINC 100

Two component polyamide cured zinc epoxy primer  

PRINCIPAL CHARACTERISTICS

• Designed as a system primer for various paint systems
• Good corrosion prevention properties
• Quick drying, can be overcoated after a short interval even if at low temperature
• Good low temperature drying the subsequent coat must be unsaponifiable

• Gray
• Flat

SIGMARINE 24

Modified zinc phosphate alkyd  primer   PRINCIPAL CHARACTERISTICS

• Economical, general-purpose maintenance and new-building primer
• Suitable for use on superstructures and on steel surfaces not normally exposed to water immersion
• The adhesion of subsequent coats is not affected by long weathering periods of the primer
• Should not be used over zinc primers, except when exposed to dry interior  conditions
• To be recoated with conventional paint systems
• A thickness of 75 µm (3.0 mils) can be obtained by spray application in one operation by means of the cross-coat   technique

• Yellow, brown, red, gray, dark gray (offwhite only on request)
• Flat

SIGMACOVER 620

Two-component, surface-tolerant, high-build, polyamide-cured epoxy primer/coating   PRINCIPAL CHARACTERISTICS

• Excellent corrosion resistance
• Good flexibility
• Surface tolerant coating for lower grade of steel preparation
• Good drying and curing property
• Easy application by different application methods such as airless spray, brush
• Low temperature version available if required

• Gray, off-white (other colors available on request)
• Aluminum colors (dark gray, light gray)
• Eggshell