SIGMATHERM 540

Sản phẩm tương tự

Related products

SIGMA VIKOTE 56
21-06
Modified acrylic finish PRINCIPAL CHARACTERISTICS
- Finish coat for above-water areas
- Good gloss- and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
COLOR AND GLOSS LEVEL
- White and various other colors (see also SIGMACARE shade card)
- Gloss
Please access this link for detailed information
SIGMA VIKOTE 56 EN
PHENGUARD 940
Two-component, high-build, amine adduct-cured novolac phenolic epoxy finish PRINCIPAL CHARACTERISTICS
- Finish coat in the PHENGUARD tank coating system
- Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
- Maximum cargo flexibility
- Low cargo absorption
- Good resistance to hot water
- Recognized corrosion control coating (Lloyd's register)
- Good application properties, resulting in a smooth surface
- Easy to clean
COLOR AND GLOSS LEVEL
- Light gray
- Eggshell
Please access this link for detailed information
SIGMA PHENGUARD 940 EN
SIGMAZINC 158
90-53
Two-component, moisture-curing zinc (ethyl) silicate primer
PRINCIPAL CHARACTERISTICS
- Certificate for ASTM A-490 class 'B' for slip coefficient
- Complies with the compositional requirements of SSPC-Paint 20, Level 2
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Galvanic action eliminates sub-film corrosion
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 158 EN
SIGMAZINC 109
91-92
Two-component, high solids polyamide adduct cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS
- Designed as a system primer for various paint systems
- Excellent anticorrosive properties
- Quick-drying, can be overcoated after a short interval
- Can serve as a holding primer for various maintenance systems for a total repair
- Very good primer for systems with high solids epoxy buildcoats
- Complies with SSPC-Paint 20 level 2 and ISO 5
COLOR AND GLOSS LEVEL
- Gray, reddish gray
- Flat
Please access this link for detailed information
SIGMAZINC 109 EN
SIGMAZINC 9
90-53
Two-component, moisture-curing zinc (ethyl) silicate coating
PRINCIPAL CHARACTERISTICS
- Specified for structural joints according to ASTM A325 or A490 Bolts RCSC specification, Class B
- Complies with the compositional requirements of SSPC-Paint 20, Level 1
- Anticorrosive primer for structural steel
- Suitable as a system primer in various paint systems based on unsaponifiable binders
- Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions
- When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)
- Good low-temperature curing
- Good impact and abrasion resistance
- Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids
COLOR AND GLOSS LEVEL
- Gray, greenish gray
- Flat
Please access this link for detailed information
SIGMAZINC 9 EN
SIGMATHERM 500
20-05
Heat resistant modified alkyd aluminium coating PRINCIPAL CHARACTERISTICS
- To be used for the internal and external protection of steel surfaces
- Heat-resistant up to 500°C (930°F); a minimum of 200°C (390°F) is necessary to fuse the aluminum coating
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Application by spray improves the appearance
COLOR AND GLOSS LEVEL
- Aluminum
- Eggshell
Please access this link for detailed information
SIGMATHERM 500 EN
SIGMATHERM 350
21-06
Heat-resistant silicone/acrylic finish PRINCIPAL CHARACTERISTICS
- Excellent resistance against weathering
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
- Heat-resistant up to 350°C (660°F)
- To be used for the internal and external protection of steel surfaces
- Widely compatible with inorganic zinc primers
COLOR AND GLOSS LEVEL
- White, aluminum (other colors available on request)
- Semi-gloss
Please access this link for detailed information
SIGMATHERM 350 EN
SIGMATHERM 175
20-05
Heat-resistant modified alkyd aluminum finish PRINCIPAL CHARACTERISTICS
- Heat-resistant up to 175°C (350°F)
- High-brilliancy
- Spray application improves the appearance
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
COLOR AND GLOSS LEVEL
- Aluminum
- Gloss
Please access this link for detailed information
SIGMATHERM 175 EN
SIGMASHIELD 220
91-92
Two-component, reinforced high solids polyamine adduct cured epoxy primer PRINCIPAL CHARACTERISTICS
- General-purpose primer for coating systems for steel
- Good abrasion resistance
- Outstanding sea water resistance
- Excellent corrosion resistance
- Good resistance against chemically-polluted water
- Resistant to well designed/controlled cathodic protection
COLOR AND GLOSS LEVEL
- Yellow/green
- Gloss
Please access this link for detailed information
SIGMASHIELD 220 EN
SIGMARINE 28
21-06
One-component, quick-drying, high-build multipurpose zinc phosphate primer

PRINCIPAL CHARACTERISTICS
- Onboard maintenance primer for above-water areas
- Easy application
- Quick-drying
- Recoatable with various one and two component products
- Surface tolerant
- Good anticorrosive properties
COLOR AND GLOSS LEVEL
- Gray, redbrown, offwhite
- Flat
Please access this link for detailed information SIGMARINE 28 EN